Version 1.1, 29.01.2008
• Dial operation on the power grip HLD-4 has been improved. The relationship between the rotation of the dial and the movement direction of the AF target has also been optimised.
• Battery check function has been improved to extend shooting time before the need to recharge when the power grip HLD-4 is attached.
• Focusing now stops immediately when the AF start button (AEL/AFL or Fn button) is released.
• Improved performance with the FL-50R or FL-36R flash units when undertaking bounce flashes at short distances.
• The selection and prioritisation of the central five ranging points when shooting in C-AF mode and dynamic-single target mode has been improved.
• The image stabilisation function is now also available with non-Four Thirds System interchangeable lenses by inputting a specific focal length.

Camera-freeze after download of new firmware, 15.02.2008
• This phenomenon occurs if any language other than the default setting was added to the menu display by Olympus Master 2 (or Olympus Studio 2) before E-3/E-510 firmware update. After updating to the latest firmware (E-3: Ver 1.1/E-510: Ver 1.3), the camera may reboot by pressing the IS button for image stabilization. 

Troubleshooting:
• This can be resolved by downloading the desired  language and add to the camera menu. Since an identical language cannot be downloaded as an additional language, please download any other language first, and then download the desired language. The process is the same for Olympus Master 2 and Olympus Studio 2.

Caution:
• This phenomenon does not occur if no optional language was added to the menu, or if Olympus Master 2/Olympus Studio 2 is used with Macintosh operating system.  This troubleshooting is not required.

This typical problem with Windows will be resolved by updating Olympus Master 2/Olympus Studio 2 in the future.