 Multiple balloon sizing.
Triple-lumen design allows for easy passage of the guidewire.
Easier cannulation and tapered sheath design.
Dual radiopaque bands for position confirmation.
C-Hook enables balloons to be attached onto the V-Holder or the V-Scope
V-Marking, located on the proximal side of the sheath, indicates when to raise and lower the V-Groove elevator
|
|
The Multi-3V balloon can be inflated to one of three diameters - 5,5mm, 11,5mm, and 15mm. The balloon size can be easily adjusted to suit the requirements and conditions of each case so there is no need to change catheters during the procedure.
Three pre-measures, clearly marked syringes enable precise inflation of each balloon to the desired size. Much easier and much more reliable than using a single syringe with different markings, the pre-measured syringes allow inflation of the balloon quickly and accurately without having to visually check the markings on the syringe.
|
_rdax_229x200.jpg "Single Use 3-Lumen Extraction Balloon V")
