Downloads for DM-901
-
NEWFirmware update Version 1.3
1) Supports displaying the artist and album information of the mp3 file with ID3v1.
2) The playback and recording stability when a SD card is used has been improved.
3) Other various updates to increase operation stability.
-
Firmware update Version 1.20
1) File copy/move in the music folder is now possible.
2) Other various updates to increase operation stability.
-
Version 1.10
1) File transfer function from Android version smart phone app "Olympus Audio Controller" to the recorder has been added.
2) Fixed phenomenon that operation status does not appear at the time of playback speed changes.
3) Other various updates to increase operation stability.
-
Voice guidance Version 1.01 / 1.02
This software is updating the voice guidance files.
You can change the voice guidance files to each language.
To change the voice guidance you can downlad the application and instructions.
-
Firmware update instructions
How to check the recorder's firmware version.
To check the firmware version of DM-901, do the following:
1) From the Home display, press the [MENU] button.
2) Press the [-] button repeatedly to select the Device Menu, which is represented by an icon of a wrench, and then press the Right Arrow button.
3) Press the [-] button repeatedly to select System Info, and then press [OK].
This screen will display the model number, firmware version and serial number of the recorder.
General precautions
Read the following precautions before starting to update the recorder firmware.
- Backup the files in the recorder before running the update program.
- This firmware update program is only for use with the Olympus DM-901 digital recorder.
- Never turn off power to the computer while the firmware update program is running.
- Never turn off power to the recorder or disconnect the USB cable while the firmware update program is running.
Installation Instructions
To update the firmware of DM-901, do the following:
1) Download the update file.
2) Connect the recorder to a computer running a supported operating system using the USB cable packaged with the recorder and wait until the recorder LCD displays "Remote".
3) Close all programs running on the computer.
4) Doubleclick the update file to begin the update.
5) Follow the on-screen prompts.
6) When the update is complete, wait until the recorder LCD displays "Remote" and then disconnect the recorder.
7) Verify that the firmware version has changed to the new version number.
-
Instruction Manual
-
-
Declaration of Conformity
